HYDRAULIC POWER UNITS
Accumulator Hydraulic Power Unit
Accumulator hydraulic power unit with a vertical motor and manifold-mounted accumulator. Review the illustrative configuration for holding and clamping systems.
- Motor power
- 3 kW
- Max. flow
- 25 L/min
- Working pressure
- 31.5 MPa
01
Product overview
This hydraulic power unit shows a vertically mounted, fin-cooled electric motor on a rectangular reservoir, with a rounded, silver-gray accumulator bottle mounted directly on top of a manifold block to the right of the motor. The manifold carries visible ports, hose fittings and a pressure switch, and the tank has a breather/filler cap and lifting eye; the finish is a monochromatic gray and metallic scheme. The figures below are an illustrative configuration for reference only; motor power, flow, pressure and tank capacity are customizable to your equipment drawing and working conditions.
Product overview
A hydraulic power unit with a vertically mounted motor and an accumulator bottle standing on the valve manifold, suited to holding, clamping and peak-demand functions.
Request a quotation
Provide the equipment drawing and working conditions to confirm the appropriate power unit configuration.
02
Specifications
- Motor power
- 3 kW
- Max. flow
- 25 L/min
- Working pressure
- 31.5 MPa
- Tank capacity
- 63 L
- Control circuits
- 2 circuits with accumulator
- Motor mounting
- Vertical mount
- Configuration basis
- Illustrative - customizable to drawing
03
Applications
- Holding and clamping systems
- Peak-demand applications
- Custom hydraulic systems
04
Selection notes
Confirm accumulator capacity and precharge, holding requirements and circuit layout. Check motor clearance, reservoir space and duty cycle against the equipment drawing; the listed figures describe an illustrative configuration, not a fixed equipment specification.
