HYDRAULIC CYLINDERS
Orange Center Flange Hydraulic Cylinder
Orange hydraulic cylinder with a mid-body circular flange and cross-drilled rod end. Review the flange position, ports and drawing-based configuration.
- Product type
- Hydraulic cylinder
- Mounting
- Mid-body circular flange
- Configuration
- Customer requirement confirmed by drawing
01
Product overview
This hydraulic cylinder is shown with a glossy orange barrel circled by a circular mounting flange about one-third of the way along its length, drilled with several evenly spaced bolt holes around its perimeter. Two connection ports rise from the top of the barrel, one toward the rear end and one near the front, and the rear end is closed by a flat circular plate. A polished silver piston rod extends from the front, with a large cross-drilled hole near its exposed end and a flat circular tip, and the rod exit is set in a recessed gland with dark internal seals and a retaining collar. Contact us with the equipment drawing and required working conditions to confirm the appropriate cylinder design.
Product overview
A hydraulic cylinder shown with a glossy orange painted barrel encircled by a circular mounting flange about one-third of the way along its length, drilled with several evenly spaced bolt holes around its perimeter. Two connection ports rise from the top of the barrel, one toward the rear end and one near the front, and the rear end is closed by a flat circular plate. A polished silver piston rod extends from the front with a large cross-drilled hole near its exposed end and a flat circular tip, and the rod exit sits in a recessed gland showing dark internal seals and a retaining collar.
Request a quotation
Provide the equipment drawing and working conditions to confirm the appropriate cylinder design.
02
Specifications
- Product type
- Hydraulic cylinder
- Mounting
- Mid-body circular flange
- Configuration
- Customer requirement confirmed by drawing
03
Applications
- Industrial equipment
- Custom machinery
04
Selection notes
Confirm the flange location along the barrel and the mating bolt pattern. Include the rod-end cross-hole dimensions and port orientation, then check the extended and retracted envelope against the machine structure.
