HYDRAULIC CYLINDERS
Upper Flange Double Acting Hydraulic Cylinder
Upper-flange double-acting hydraulic cylinder for suspended tooling and clamping arrangements. Review bore, rod, mounting and stroke requirements.
- Bore
- 63mm / 125mm / 180mm
- Rod
- 35mm / 70mm / 110mm
- Stroke
- 1000mm / 1000mm / 1000mm
01
Product overview
This upper flange double acting hydraulic cylinder mounts from a flange near the rod end, allowing the barrel to hang below the machine structure. It suits pull-down presses, bale clamps and suspended tooling where the load is applied from above. Three standard bore options share a 1000mm stroke.
Product overview
A double acting hydraulic cylinder with an upper mounting flange. Mounting at the rod end lets the barrel extend downward through the machine frame, a common arrangement for pull-down presses, clamping devices and suspended actuators.
Three standard configurations are available: bore 63mm with 35mm rod, bore 125mm with 70mm rod, and bore 180mm with 110mm rod, each with a 1000mm stroke.
Request a quotation
Tell us the required bore, stroke, working pressure and mounting orientation, or send the equipment drawing, and we will confirm the matching configuration and price.
02
Specifications
- Bore
- 63mm / 125mm / 180mm
- Rod
- 35mm / 70mm / 110mm
- Stroke
- 1000mm / 1000mm / 1000mm
- Price
- $89 / $219 / $369
Listed prices are reference information and require a current quotation.
03
Applications
- Pull-down presses
- Bale and scrap clamps
- Suspended tooling
04
Selection notes
Confirm the structure supporting the upper flange and the clearance below it for the barrel. Check bolt pattern, load direction, bore and rod dimensions with the drawing, and confirm the quotation for the selected configuration.
